nftables: fix broken displace logic

It seems that my package was broken due to a somewhat misinterpretation
of `config-package-dev` documentation.

1 files changed, 0 insertions, 122 deletions

diff --git a/files/etc/nftables.conf b/files/etc/nftables.conf
deleted file mode 100644
index 5d851f0..0000000
--- a/files/etc/nftables.conf
+++ /dev/null
@@ -1,122 +0,0 @@
-#!/usr/sbin/nft -f
-
-flush ruleset
-
-define eth_iface = enp1s0
-define wg_iface = wg0
-define wg_port = 51820
-define dns_port = 53
-define srt_input_udp_port = 60001
-define srt_output_port = 60000
-define srb2kart_port = 5029
-define syncthing_port = 22000
-define syncthing_gui_port = 8384
-
-table inet filter {
-  chain input_ipv4 {
-    # accepting ping (icmp-echo-request) for diagnostic purposes.
-    # However, it also lets probes discover this host is alive.
-    # This sample accepts them within a certain rate limit:
-      icmp type echo-request limit rate 5/second accept
-  }
-
-  chain input_ipv6 {
-    # accept neighbour discovery otherwise connectivity breaks
-    icmpv6 type { nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept
-
-    # accepting ping (icmpv6-echo-request) for diagnostic purposes.
-    # However, it also lets probes discover this host is alive.
-    # This sample accepts them within a certain rate limit:
-    icmpv6 type echo-request limit rate 5/second accept
-  }
-
-  chain input_world {
-    udp dport {
-      $wg_port
-    } accept
-  }
-
-  chain input_vpn {
-    # TODO: Should we limit source address space?
-    #
-    # ip saddr 10.8.0.0/32
-
-    # Allow VPN to use DNS.
-    tcp dport {
-      $dns_port,
-      $syncthing_port,
-      $syncthing_gui_port,
-    } accept
-
-    udp dport {
-      $dns_port,
-      $srt_input_udp_port,
-      $syncthing_port,
-    } accept
-  }
-
-  chain input {
-    # By default, drop all traffic unless it meets a filter
-    # criteria specified by the rules that follow below.
-    type filter hook input priority 0; policy drop;
-
-    # Allow traffic from established and related packets, drop invalid
-    ct state vmap { established : accept, related : accept, invalid : drop }
-
-    # Jump to chain according to layer 3 protocol using a verdict map
-    meta protocol vmap { ip : jump input_ipv4, ip6 : jump input_ipv6 }
-
-    # Allow traffic for/from both the world and VPN.
-    tcp dport {
-      ssh,
-      http,
-      https,
-    } accept
-
-    udp dport {
-      $srt_output_port,
-      $srb2kart_port,
-    } accept
-
-    # allow loopback traffic, anything else jump to chain for further evaluation
-    iifname vmap { lo : accept, $eth_iface : jump input_world, $wg_iface : jump input_vpn }
-
-    # Uncomment to enable logging of denied input traffic
-    # log prefix "[nftables] input Denied: " counter drop
-
-    # Reject with polite "port unreachable" icmp response
-    reject
-  }
-
-  chain forward {
-    # Drop everything (assumes this device is not a router)
-    # type filter hook forward priority filter;
-    type filter hook forward priority 0; policy drop;
-
-    # Forward all icmp/icmpv6 packets
-    meta l4proto { icmp, ipv6-icmp } accept
-
-    # Allow traffic from established and related packets, drop invalid
-    ct state vmap { established : accept, related : accept, invalid : drop }
-
-    # Forward traffic within the VPN and between it and the outside world.
-    iifname $wg_iface oifname $wg_iface counter accept;
-    iifname $wg_iface oifname $eth_iface counter accept;
-    iifname $eth_iface oifname $eth_iface counter accept;
-
-    # Reject with polite "host unreachable" icmp response
-    reject with icmpx type host-unreachable
-  }
-
-  chain prerouting {
-    type nat hook prerouting priority 0;
-  }
-
-  chain postrouting {
-    type nat hook postrouting priority 100; policy accept;
-    # Masquerade all packets from WireGuard VPN to the outside world.
-    iifname $wg_iface oifname $eth_iface masquerade
-  }
-
-  # no need to define output chain, default policy is accept if undefined.
-}