From 190194593f520bca5f790a253259babc57a953db Mon Sep 17 00:00:00 2001
From: Renken <renken@shione.net>
Date: Tue, 30 Jul 2024 20:55:43 +0200
Subject: nftables: allow syncthing access over vpn

GUI is also accessible over VPN. However, it will be replaced by
sync.shione.net later on routed through nginx.
---
 config/shione/nftables/files/etc/nftables.conf | 38 ++++++++++++++++----------
 1 file changed, 23 insertions(+), 15 deletions(-)

(limited to 'config/shione/nftables')

diff --git a/config/shione/nftables/files/etc/nftables.conf b/config/shione/nftables/files/etc/nftables.conf
index 3365e34..aa9f5c4 100644
--- a/config/shione/nftables/files/etc/nftables.conf
+++ b/config/shione/nftables/files/etc/nftables.conf
@@ -1,6 +1,6 @@
 #!/usr/sbin/nft -f
 
-flush ruleset                                                                    
+flush ruleset
 
 define eth_iface = enp1s0
 define wg_iface = wg0
@@ -9,19 +9,21 @@ define dns_port = 53
 define srt_input_udp_port = 60001
 define srt_output_port = 60000
 define srb2kart_port = 5029
-                                                                                 
+define syncthing_port = 22000
+define syncthing_gui_port = 8384
+
 table inet filter {
   chain input_ipv4 {
     # accepting ping (icmp-echo-request) for diagnostic purposes.
     # However, it also lets probes discover this host is alive.
     # This sample accepts them within a certain rate limit:
-      icmp type echo-request limit rate 5/second accept      
+      icmp type echo-request limit rate 5/second accept
   }
 
-  chain input_ipv6 {                                                         
+  chain input_ipv6 {
     # accept neighbour discovery otherwise connectivity breaks
     icmpv6 type { nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept
-                                                                                 
+
     # accepting ping (icmpv6-echo-request) for diagnostic purposes.
     # However, it also lets probes discover this host is alive.
     # This sample accepts them within a certain rate limit:
@@ -40,20 +42,26 @@ table inet filter {
     # ip saddr 10.8.0.0/32
 
     # Allow VPN to use DNS.
-    tcp dport { $dns_port } accept
+    tcp dport {
+      $dns_port
+      $syncthing_port,
+      $syncthing_gui_port,
+    } accept
+
     udp dport {
       $dns_port,
       $srt_input_udp_port,
+      $syncthing_port,
     } accept
   }
 
-  chain input {                                                              
+  chain input {
     # By default, drop all traffic unless it meets a filter
     # criteria specified by the rules that follow below.
     type filter hook input priority 0; policy drop;
 
     # Allow traffic from established and related packets, drop invalid
-    ct state vmap { established : accept, related : accept, invalid : drop } 
+    ct state vmap { established : accept, related : accept, invalid : drop }
 
     # Jump to chain according to layer 3 protocol using a verdict map
     meta protocol vmap { ip : jump input_ipv4, ip6 : jump input_ipv6 }
@@ -78,10 +86,10 @@ table inet filter {
 
     # Reject with polite "port unreachable" icmp response
     reject
-  }                                                                            
-                                                                                 
-  chain forward {                                                              
-    # Drop everything (assumes this device is not a router)                  
+  }
+
+  chain forward {
+    # Drop everything (assumes this device is not a router)
     # type filter hook forward priority filter;
     type filter hook forward priority 0; policy drop;
 
@@ -89,7 +97,7 @@ table inet filter {
     meta l4proto { icmp, ipv6-icmp } accept
 
     # Allow traffic from established and related packets, drop invalid
-    ct state vmap { established : accept, related : accept, invalid : drop } 
+    ct state vmap { established : accept, related : accept, invalid : drop }
 
     # Forward traffic within the VPN and between it and the outside world.
     iifname $wg_iface oifname $wg_iface counter accept;
@@ -98,7 +106,7 @@ table inet filter {
 
     # Reject with polite "host unreachable" icmp response
     reject with icmpx type host-unreachable
-  }                                                                            
+  }
 
   chain prerouting {
     type nat hook prerouting priority 0;
@@ -109,6 +117,6 @@ table inet filter {
     # Masquerade all packets from WireGuard VPN to the outside world.
     iifname $wg_iface oifname $eth_iface masquerade
   }
-                                                                                 
+
   # no need to define output chain, default policy is accept if undefined.
 }
-- 
cgit v1.2.3